@echo off
setLocal EnableDelayedExpansion

cd ..
set WRK=%CD%
cd %WRK%\work

set DIR=c:
set PGM=%DIR%\hysplit4

echo ../files/            >input.txt
echo wrf11031400.bin     >>input.txt
echo 01                  >>input.txt
echo TPP1 01 1000.0      >>input.txt
echo 37.4206 141.0329    >>input.txt
echo 1                   >>input.txt
echo rain.txt            >>input.txt
echo 1                   >>input.txt
echo 9999                >>input.txt
%PGM%\exec\xtrct_stn -i   <input.txt

echo -90.0   -180.0  lat/lon of lower left corner   >ASCDATA.CFG
echo 1.0     1.0     lat/lon spacing in degrees    >>ASCDATA.CFG
echo 180     360     lat/lon number of data points >>ASCDATA.CFG
echo 2               default land use category     >>ASCDATA.CFG
echo 0.2             default roughness length (m)  >>ASCDATA.CFG
echo '%PGM%\bdyfiles\'  directory of files         >>ASCDATA.CFG

echo 11 03 15 12              >CONTROL.txt
echo 2                       >>CONTROL.txt
echo 37.4206 141.0329 1.0    >>CONTROL.txt
echo 37.4206 141.0329 100.0  >>CONTROL.txt
echo 12                      >>CONTROL.txt
echo 0                       >>CONTROL.txt
echo 10000.0                 >>CONTROL.txt
echo 1                       >>CONTROL.txt
echo ../files/               >>CONTROL.txt
echo wrf11031400.bin         >>CONTROL.txt
echo 1                       >>CONTROL.txt
echo CPAR                    >>CONTROL.txt
echo 8.33333                 >>CONTROL.txt
echo 12.0                    >>CONTROL.txt
echo 00 00 00 00 00          >>CONTROL.txt
echo 1                       >>CONTROL.txt
echo 38.0 140.0              >>CONTROL.txt
echo 0.05 0.05               >>CONTROL.txt
echo 20.0 30.0               >>CONTROL.txt    
echo ./                      >>CONTROL.txt
echo fdnpp.bin               >>CONTROL.txt
echo 2                       >>CONTROL.txt
echo 0 100                   >>CONTROL.txt
echo 00 00 00 00 00          >>CONTROL.txt
echo 00 00 00 00 00          >>CONTROL.txt
echo 00 12 00                >>CONTROL.txt
echo 1                       >>CONTROL.txt
echo 1.0 1.0 1.0             >>CONTROL.txt
echo 0.001 0.0 0.0 0.0 0.0   >>CONTROL.txt

echo ^&SETUP                >SETUP.CFG
echo delt = 5.0,           >>SETUP.CFG
echo initd = 0,            >>SETUP.CFG
echo khmax = 24,           >>SETUP.CFG
echo numpar = -2500,       >>SETUP.CFG
echo maxpar = 300000,      >>SETUP.CFG
echo krand = 1,            >>SETUP.CFG
echo vscales = 5.0,        >>SETUP.CFG
echo vscaleu = 200.0,      >>SETUP.CFG
echo kmix0 = 150,          >>SETUP.CFG
echo rhb = 100,            >>SETUP.CFG
echo rht = 80,             >>SETUP.CFG
echo /                     >>SETUP.CFG

copy SETUP.CFG SETUP.ver0
copy CONTROL.txt CONTROL.ver0
echo 0.0 3.2+05 5.0E-05      >>CONTROL.ver0
echo 0.0                     >>CONTROL.ver0
echo 0.0                     >>CONTROL.ver0
..\programs\hycs_577 ver0
%PGM%\exec\concplot -ifdnpp.bin -oplot_dept0 -j%PGM%\graphics\arlmap -y1.0E+10 -b0 -t0 -z95 -h37.0:140.0 -g0:500 -k2 -c4 -v100+50+20+10+5+2+1

copy SETUP.CFG SETUP.ver1
copy CONTROL.txt CONTROL.ver1
echo 0.0 4.0E+04 5.0E-05     >>CONTROL.ver1
echo 0.0                     >>CONTROL.ver1
echo 0.0                     >>CONTROL.ver1
..\programs\hycs_577 ver1
%PGM%\exec\concplot -ifdnpp.bin -oplot_dept1 -j%PGM%\graphics\arlmap -y1.0E+10 -b0 -t0 -z95 -h37.0:140.0 -g0:500 -k2 -c4 -v100+50+20+10+5+2+1

copy SETUP.CFG SETUP.ver2
copy CONTROL.txt CONTROL.ver2
echo 0.0 4.0E+04 5.0E-05     >>CONTROL.ver2
echo 0.0                     >>CONTROL.ver2
echo 0.0                     >>CONTROL.ver2
%PGM%\exec\hycs_std ver2
%PGM%\exec\concplot -ifdnpp.bin -oplot_dept2 -j%PGM%\graphics\arlmap -y1.0E+10 -b0 -t0 -z95 -h37.0:140.0 -g0:500 -k2 -c4 -v100+50+20+10+5+2+1

copy SETUP.CFG SETUP.ver3
copy CONTROL.txt CONTROL.ver3
echo 0.0 1.0+06 1.0E-06      >>CONTROL.ver3
echo 0.0                     >>CONTROL.ver3
echo 0.0                     >>CONTROL.ver3
%PGM%\exec\hycs_std ver3
%PGM%\exec\concplot -ifdnpp.bin -oplot_dept3 -j%PGM%\graphics\arlmap -y1.0E+10 -b0 -t0 -z95 -h37.0:140.0 -g0:500 -k2 -c4 -v100+50+20+10+5+2+1

copy SETUP.CFG SETUP.ver4
copy CONTROL.txt CONTROL.ver4
echo 0.0 8.0E-05 8.0E-05     >>CONTROL.ver4
echo 0.0                     >>CONTROL.ver4
echo 0.0                     >>CONTROL.ver4
%PGM%\exec\hycs_std ver4
%PGM%\exec\concplot -ifdnpp.bin -oplot_dept4 -j%PGM%\graphics\arlmap -y1.0E+10 -b0 -t0 -z95 -h37.0:140.0 -g0:500 -k2 -c4 -v100+50+20+10+5+2+1