@echo off
setLocal EnableDelayedExpansion

cd ..
set WRK=%CD%
cd %WRK%\work

set DIR=c:
set PGM=%DIR%\hysplit4

echo -90.0   -180.0  lat/lon of lower left corner   >ASCDATA.CFG
echo 1.0     1.0     lat/lon spacing in degrees    >>ASCDATA.CFG
echo 180     360     lat/lon number of data points >>ASCDATA.CFG
echo 2               default land use category     >>ASCDATA.CFG
echo 0.2             default roughness length (m)  >>ASCDATA.CFG
echo '%PGM%\bdyfiles\'  directory of files         >>ASCDATA.CFG

echo 11 03 21 12              >CONTROL
echo 1                       >>CONTROL
echo 11.0 -84.0 10.0         >>CONTROL
echo 12                      >>CONTROL
echo 0                       >>CONTROL
echo 10000.0                 >>CONTROL
echo 1                       >>CONTROL
echo ../../Tutorial/japan/   >>CONTROL
echo gdas11-22.bin           >>CONTROL
echo 1                       >>CONTROL
echo TEST                    >>CONTROL
echo 1.0                     >>CONTROL
echo 12.0                    >>CONTROL
echo 00 00 00 00 00          >>CONTROL
echo 1                       >>CONTROL
echo 0.0 0.0                 >>CONTROL
echo 0.05 0.05               >>CONTROL
echo 15.0 25.0               >>CONTROL    
echo ./                      >>CONTROL
echo cdump                   >>CONTROL
echo 1                       >>CONTROL
echo 100                     >>CONTROL
echo 00 00 00 00 00          >>CONTROL
echo 00 00 00 00 00          >>CONTROL
echo 00 12 00                >>CONTROL
echo 1                       >>CONTROL
echo 0.0 0.0 0.0             >>CONTROL
echo 0.0 0.0 0.0 0.0 0.0     >>CONTROL
echo 0.0 0.0 0.0             >>CONTROL
echo 0.0                     >>CONTROL
echo 0.0                     >>CONTROL

REM ------------------------------------------------------

echo ^&SETUP                >SETUP.CFG
echo ndump = 1,            >>SETUP.CFG
echo ncycl = 1,            >>SETUP.CFG
echo /                     >>SETUP.CFG

%PGM%\exec\hycs_std
%PGM%\exec\parxplot -iPARDUMP -j%PGM%\graphics\arlmap -k1 -z90 -oparxplot_none 

REM ------------------------------------------------------

echo ^&SETUP                >SETUP.CFG
echo ndump = 1,            >>SETUP.CFG
echo ncycl = 1,            >>SETUP.CFG
echo capemin = 500,        >>SETUP.CFG
echo /                     >>SETUP.CFG

%PGM%\exec\hycs_std
%PGM%\exec\parxplot -iPARDUMP -j%PGM%\graphics\arlmap -k1 -z90 -oparxplot_cape